Equipment

Stock #: 6490

Mori MV65B/50 60” x 25” x 25” 50 Taper 40 ATC Side Mount Mori Fanuc MF6

Stock #: 6479

Mori Seiki NHX-4000 2011 15.7" x 15.7" 0.001 Degree 22" 22" 26" BT#40 Taper

Stock #: 6461

Mori Seiki SL-35B Fanuc 10T

Stock #: 6424

Stock #: 6492

Nakamura-Tomy WY100 machine for sale Fanuc Control Low Hours (very little used) 9 Axis (C and Y on both sides) LNS 4 feet bar loader 2 chucks 2 three jaw chucks Extended memory Chip Conveyor Parts...

Stock #: 6436

Specifications Manufacturer Naxos Year 1987 Condition Used Stock Number 3272 Max. swing 24.78" Max. distance workhead face to tailstock face 191" Max. travel for z axis (table) 198" Max. grinding d...

Stock #: 6480

This Okuma LB3000MYW was installed in 6/2021 The machine is in great condition, low hours, and optioned very nice. 1 Okuma LB3000EX-II/800-MYW (16.03 STD) 1 Okuma VE...

Stock #: 6510

Okuma Model LB45II-M Long Bed CNC Lathe with Live Milling Mfg. in 1998 Installed in 2000 Osp-7000L Cnc Control Swing Over Bed: 35.43" Turning Diameter, Shaft Diameter: 21.65" Machining Length: 118....

Stock #: 6407

2001 Okuma MA-60HB Machining Center Osp-U100M 4600 Hours Cut Time Travel – X 1000, Y 800, Z 810 Machine is in very good condition Accessories; Two 24” x 24” approximate size pallets Lift up chip co...

Stock #: 6460

Okuma Howa ACT-2SP-V3 Twin Spindle Fanuc Ott 15" Chuck size (2)

Stock #: 6446

POREBA PNA-102/106/6M DESCRIPTION: 40" x 236", 32" chuck, Fanuc 0i-TC SPECIFICATIONS: SIZE 32" Chuck SWING 41.73" MACHINING LENGTH 236" # AXIS 2 CHUCK SIZE 32" BAR CAPACITY 4.17" POWER 30 hp...

Stock #: 6494

Included with Sale: -Copilot so􀅌ware -ProFeeder Cart System (htps://procobots.com/machine-tending-automa􀆟on/#profeeder) -Robo􀆟q Wrist Camera (installed, par􀆟ally configured) -2x Robo􀆟q Hand-E gripp...

Stock #: 6366

Stock #: 6445

SOUTHWESTERN TRAK LPM MACHINING CENTER DESCRIPTION: 40 Taper, 8000 RPM, 24 ATC, 15HP, Prototrak PMX CNC Control SPECIFICATIONS: SIZE 31" x 18" X TRAVEL 31" Y TRAVEL 18.5" Z TRAVEL 21" POWER ...

Stock #: 6485

Studer S40-4. Specs: Grinding Diameter: 0.2-240mm Centre Height: 125mm Grind Length: 70mm Speed: 0.0001-10.000 mm/min Centre Distance: 1.00mm Swiveling range: 180 degrees Grinding Depth: 170 mm S...

Stock #: 6500

TUR630AMN 2006 2M length 5.5” spindle bore 2 steady rests 15.1” capacity Siemens Conversational Control Excellent stability with long boring bars Adjust spindle speed while threading Excelle...

Stock #: 6501

TUR630AMN 2007 3M length 5.5” spindle bore 2 steady rests 15.1” capacity Siemens Conversational Control Excellent stability with long boring bars Adjust spindle speed while threading Excelle...

Stock #: 6502

TUR630AMN 2008 3M length 5.5” spindle bore 2 steady rests 15.1” capacity Siemens Conversational Control Excellent stability with long boring bars Adjust spindle speed while threading Excellen...

Stock #: 6508

VANGUARD Model: CAK80485D size 28" chuck Swing 32" Machining Length 191" # Axis 2 Chuck Size 28" Bar Capacity 4.13" Power 20 hp Max RPM 1,000 RPM Turning Dia 18.9" Tailstock Yes Live Tooling No Su...

Stock #: 6447

Model: RX-3013 Make: WardJet Year: 2009 Capacity: 13‘ x 30‘ Cutting Surface: 30′ x 13′ Cutting Capacity Height/ Thickness: 12″ Pump Capacity: 60,000 PSI Cutting Heads: 4 Equipped With: 1 – 30′ x ...

Stock #: 6449

Wysong H-2052 Press Brake

Stock #: 6511

40" chuck, 12 ATC, Fanuc 18iTB CNC Specifications (Preliminary) Max Swing: 53" Max Cutting Dia:: 47" Max Cross Travel (X): 15.7", Plus 30.5" Max Clearance Under Ram: 49.8" Cross Rail Moveme...